The full International® Paint range, supplied from Batam.
International® marine coatings for every area of the vessel, supplied by CV Yunara as authorized distributor. Protective coatings for oil & gas, offshore and steel structures are supplied too.
Underwater Hull
Antifoulings and foul release systems, over the appropriate primer and tie coat.
Key products:Intersmooth, Interspeed, Intersleek, Intershield
Keel to Rail
Topsides, boottop and underwater hull treated as one programme, during a full dry-docking.
Topsides & Superstructures
Anti-corrosives and cosmetic finishes for everything above the waterline.
Key products:Interthane, Interlac
Decks
High performance deck coatings, specified for traffic and abrasion.
Key products:Intershield, Interthane
Cargo Holds
Abrasion resistant and cargo hold coatings for the primary stowage space.
Key products:Intershield, Interzone
Cargo Tanks
Linings selected against the cargoes actually carried and the previous cargo history.
Key products:Interline
Ballast Tanks
Water ballast tank coatings for the compartments that hold ballast water.
Key products:Intershield, Interzone
Potable Water Tanks
Approved linings for compartments holding drinking water.
Key products:Interline
Protective & Structural Steel
Protective coatings for oil & gas, offshore structures, steel fabrication and plant.
Key products:Interzinc, Interseal, Interthane
Yacht
Sourced on request.
Key products shown. For other products and their datasheets, contact us. Coating specifications, film thicknesses and overcoating intervals are issued in writing for your vessel and scope, against the manufacturer's datasheet. Ask and we'll send them.
The full International® Paint marine range.
Every product below is supplied by CV Yunara. Datasheets and written specifications on request.
Underwater hull: foul release6 products
Biocide-free, very smooth hull finish. Fouling has trouble sticking and washes off as the ship moves. For active vessels.
Biocide-free silicone-type foul release finish for the underwater hull.
Tie coat that bonds the foul release finish to the anticorrosive system below it.
Two-pack tie coat for Intersleek foul release systems.
Link coat used within Intersleek foul release systems.
Link coat used within Intersleek foul release systems.
Underwater hull: antifouling18 products
Low-friction antifouling that polishes away evenly over the docking cycle.
Low-friction, linear polishing antifouling.
Premium self-polishing antifouling for long docking intervals and low hull friction.
Self-polishing antifouling for long docking intervals.
Self-polishing antifouling for deep-sea trading vessels.
High-solids self-polishing antifouling.
High-solids self-polishing antifouling.
Proven self-polishing antifouling for general trading vessels.
Tin-free self-polishing antifouling.
Copper-free, low-friction self-polishing antifouling.
High-solids antifouling for medium docking intervals.
Antifouling for medium docking intervals.
Reliable antifouling for coastal vessels and shorter docking intervals.
Antifouling for coastal and short-interval vessels.
Antifouling for coastal and short-interval vessels.
Polishing antifouling for workboats and coastal vessels.
Copper-free antifouling, for example for aluminium hulls.
Tin-free antifouling.
Primers and anticorrosives16 products
Universal epoxy primer and anticorrosive. Used on underwater hull, ballast tanks and holds.
Low-VOC version of Intershield 300, also for low temperatures.
High-solids version of Intershield 300.
Epoxy primer for many areas of the ship, newbuild and repair.
Epoxy universal primer.
Epoxy universal primer.
Pure epoxy universal primer.
High-solids pure epoxy universal primer.
High-solids pure epoxy universal primer.
Solvent-free epoxy primer.
Epoxy anticorrosive coating.
High-solids epoxy anticorrosive, one or two coats. Also for ballast tanks.
Tar-free epoxy for maintenance where full blasting is not possible.
Touch-up primer for repairs on board (red and aluminium).
Tie coats between the epoxy system and the finish coat.
Zinc phosphate primer.
Shop primers (newbuild steel)2 products
Shop primers applied to steel plates before fabrication in the yard.
Water-based shop primer for steel before fabrication.
Topsides and superstructure9 products
Hard-wearing gloss finish with good colour and gloss retention.
Alkyd finish coat. Supplied for KRI Sriwijaya-100 in navy grey.
Silicone alkyd finishes for topsides, superstructure and deck fittings.
Alkyd finish.
Premium finishes with very long gloss and colour retention.
Acrylic finish.
Semi-gloss finish, typically for interiors and accommodation.
Heat-resistant aluminium coating for funnels and exhausts.
Clear alkyd varnish for wood.
Decks5 products
Non-skid epoxy deck coatings for working decks.
High-build non-skid deck coating.
Non-skid polyurethane finishes (high and low profile).
Epoxy primers for deck systems.
High-solids non-skid coatings for helicopter and flight decks.
Cargo holds4 products
Tough epoxy for cargo holds that take heavy wear from bulk cargo and grabs.
Glass flake reinforced epoxy for high abrasion and impact.
Abrasion-resistant epoxies for holds.
Epoxy primer/finish for holds (temperate and low-temperature versions).
Cargo tanks7 products
Advanced tank lining for a very wide range of cargoes.
Tank lining for chemicals and aggressive cargoes.
Epoxy phenolic tank lining. Also approved for potable water.
Epoxy phenolic tank linings.
Epoxy linings for oil product and crude tanks.
Zinc silicate linings for solvents and specific chemicals.
Repair coating for damaged areas in cargo tanks.
Ballast tanks3 products
Long-term anticorrosive for water ballast tanks.
Epoxy anticorrosive for ballast tanks.
For ballast tank maintenance where surface preparation is limited.
Potable water tanks2 products
Light-coloured, solvent-free lining for drinking water tanks, thick film in one coat.
Heavy-duty solvent-free lining for drinking water tanks.
Other2 products
Epoxy filler for smoothing and fairing surfaces.
Abrasion-resistant epoxy for ice-going vessels.
Paint supply for your next docking.
Send the products and quantities, or the vessel and the areas to be coated, with the required date. We reply with a quotation by email or WhatsApp.